Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Absorbing boundary condition for transient wave propagation problem

Posted 2013年3月4日 GMT-5 15:14 Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 5.0, Version 5.3 8 Replies

Debaditya Dutta
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!

I am wondering if I can define an absorbing boundary condition for a transient ultrasonic wave propagation problem (let's say in a 2D plane strain transient module). The option certainly doesn't come up in the boundary conditions pulldown menu. I wonder if there is a trick.

Thanks!

Deb
8 Replies Last Post 2017年9月6日 GMT-4 06:56
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月4日 GMT-5 15:23
use PML
use PML
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月4日 GMT-5 18:49
Hi,

What you are looking for is the "Low-Reflecting Boundary" which should be available for 2D Plain Strain as long as you have either the Structural Mechanics, MEMS or Acoustics Module. A PML can only be used in frequency domain analyses.

Regards,
Henrik
Hi, What you are looking for is the "Low-Reflecting Boundary" which should be available for 2D Plain Strain as long as you have either the Structural Mechanics, MEMS or Acoustics Module. A PML can only be used in frequency domain analyses. Regards, Henrik
Gyani Shankar Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年2月16日 GMT-5 18:09
Hi Henrik,

How do you apply PML in structural mechanics module? I am doing a modal analysis and only see 'Low reflection boundary' option.

Thanks,
Gyani
Hi Henrik, How do you apply PML in structural mechanics module? I am doing a modal analysis and only see 'Low reflection boundary' option. Thanks, Gyani
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年2月17日 GMT-5 02:19
Hi,

You select a domain as PML under Component->Definitions.

Regards.
Henrik
Hi, You select a domain as PML under Component->Definitions. Regards. Henrik
Gyani Shankar Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年2月17日 GMT-5 19:19
Thanks very much!
Thanks very much!
Shengli Fan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年4月27日 GMT-4 00:41

Hi,

What you are looking for is the "Low-Reflecting Boundary" which should be available for 2D Plain Strain as long as you have either the Structural Mechanics, MEMS or Acoustics Module. A PML can only be used in frequency domain analyses.

Regards,
Henrik


Hi Henrik,

It is true that the PML is only available in frequency domain analyses. Could you please explain the reason? And what should I deal with the reflection by the boundary if I work on the transient process, like pulse scattering? Thank you very much.

Best,
Shengli
[QUOTE] Hi, What you are looking for is the "Low-Reflecting Boundary" which should be available for 2D Plain Strain as long as you have either the Structural Mechanics, MEMS or Acoustics Module. A PML can only be used in frequency domain analyses. Regards, Henrik [/QUOTE] Hi Henrik, It is true that the PML is only available in frequency domain analyses. Could you please explain the reason? And what should I deal with the reflection by the boundary if I work on the transient process, like pulse scattering? Thank you very much. Best, Shengli
Denny Bhatara
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年9月6日 GMT-4 06:22

Hi

I can't found the PML option even i selected Definition under the Component
--
Denny Bhatara
Physics Departement, Faculty of Mathematic and Nature Science
Bogor Agriculture University, Indoesia (ID)
Hi I can't found the PML option even i selected Definition under the Component -- Denny Bhatara Physics Departement, Faculty of Mathematic and Nature Science Bogor Agriculture University, Indoesia (ID)
Denny Bhatara
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年9月6日 GMT-4 06:56

Hi

I can't found the PML option even i selected Definition under the Component
--
Denny Bhatara
Physics Departement, Faculty of Mathematic and Nature Science
Bogor Agriculture University, Indoesia (ID)


Solved. Just right click on the Defiinition (Component -> Definition -> Right Click).


--
Denny Bhatara
Physics Departement, Faculty of Mathematic and Nature Science
Bogor Agriculture University, Indoesia (ID)
[QUOTE] Hi I can't found the PML option even i selected Definition under the Component -- Denny Bhatara Physics Departement, Faculty of Mathematic and Nature Science Bogor Agriculture University, Indoesia (ID) [/QUOTE] Solved. Just right click on the Defiinition (Component -> Definition -> Right Click). -- Denny Bhatara Physics Departement, Faculty of Mathematic and Nature Science Bogor Agriculture University, Indoesia (ID)

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content