Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
conversion of 3D geometery model from comsol to .stl or .stp or.igs
Posted 2013年3月13日 GMT-4 01:56 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Dear Sir,
I have designed 3d capacitive single axis accelerometer. So can i convert this 3d geometry model to any of the formats such as, .stl or .stp or.igs. Please suggest me.
I have designed 3d capacitive single axis accelerometer. So can i convert this 3d geometry model to any of the formats such as, .stl or .stp or.igs. Please suggest me.
1 Reply Last Post 2013年3月13日 GMT-4 06:55
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
If it is a COMSOL geometry I do not believe you can export it in other than COMSOL geom format. There are licence issues around echange of propretarian formats, and stl is not a true 3D format, iges not really either
If you have imported the geometry from a CAD, I belive you can reexport it, but I have never tried.
But I use the COMSOL geom for my simple modls, and to complete received CAD models, never the other way ;)
--
Good luck
Ivar
If it is a COMSOL geometry I do not believe you can export it in other than COMSOL geom format. There are licence issues around echange of propretarian formats, and stl is not a true 3D format, iges not really either
If you have imported the geometry from a CAD, I belive you can reexport it, but I have never tried.
But I use the COMSOL geom for my simple modls, and to complete received CAD models, never the other way ;)
--
Good luck
Ivar