Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Automatically parameter increasing

Posted 2013年3月13日 GMT-4 12:26 Acoustics & Vibrations, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers, Structural Mechanics Version 4.3 1 Reply

farhang doosti
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear friends,
I have a simple 2D rectangular model, I want to measure some acoustic properties in my desired frequency range, for specific height of model it's easy, but I want to check a range of heights for example 0.1 mm to 10 mm, with 0.1 increment, how can I set COMSOL to do this and save data automatically?
Regards
1 Reply Last Post 2013年3月13日 GMT-4 13:46
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年3月13日 GMT-4 13:46
Hi

you have the Parametric Sweep node to get one or several Parameters running and have these parameter values defining your geoemtry shape diemnsions, then let it run ;)
--
Good luck
Ivar
Hi you have the Parametric Sweep node to get one or several Parameters running and have these parameter values defining your geoemtry shape diemnsions, then let it run ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content