Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Time Dependent Studies

Posted 2013年4月2日 GMT-4 09:52 Version 4.3a 1 Reply

Richard Earp
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I'm setting up a model with a lot of my own equations, and the whole thing is dependent on time. How do I refer to results from a previous/particular time step in my equations?

Thanks,

Rich
1 Reply Last Post 2013年4月2日 GMT-4 14:57
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月2日 GMT-4 14:57
Hi

for the postprocessing (not for the solving) you can use the at() (and related with() ) special operators. You have the extrusion and projection coupling operators to link spatial dependent variables from one FEM entity to another

--
Good luck
Ivar
Hi for the postprocessing (not for the solving) you can use the at() (and related with() ) special operators. You have the extrusion and projection coupling operators to link spatial dependent variables from one FEM entity to another -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content