Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
how to plot graph b/w preeure vs displacement
Posted 2013年4月3日 GMT-4 02:25 Version 4.2, Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
i need procedure how to plot grap for pressure sensor and how to observe pressure and displacement value......
Attachments:
1 Reply Last Post 2013年4月3日 GMT-4 10:57
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
eithjer define a point or an boundary, and get the average value (average operator or integration operator over a point, or over a Data Set "point") and then use the Results Derived values to get a table with pressure (as you probably changed it qwith a parametric sweep) and the average displacement. (or with the max displacement operator)
This is also described in some of the videos on the main site
--
Good luck
Ivar
eithjer define a point or an boundary, and get the average value (average operator or integration operator over a point, or over a Data Set "point") and then use the Results Derived values to get a table with pressure (as you probably changed it qwith a parametric sweep) and the average displacement. (or with the max displacement operator)
This is also described in some of the videos on the main site
--
Good luck
Ivar