Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to apply harmonic and random vibration's load?

Posted 2013年4月12日 GMT-4 01:45 Acoustics & Vibrations Version 4.2 3 Replies

Sheng Yao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, I want to know how to apply harmonic and random vibration 's load in comsol v4.2,
my previous operation is that first, apply a boundary load, then give a range of frequency, am I right?
or please give me a detailed guide, many thanks.
3 Replies Last Post 2014年3月22日 GMT-4 14:44
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月12日 GMT-4 02:01

That's exactly the procedure. You perform a frequency domain study and specify a range of frequencies or a single frequency. That makes the boundary load harmonic.
For random vibration you have to do a transient study and specify the load as a function of time.

Cheers
Edgar

--
Edgar J. Kaiser
www.emphys.com
That's exactly the procedure. You perform a frequency domain study and specify a range of frequencies or a single frequency. That makes the boundary load harmonic. For random vibration you have to do a transient study and specify the load as a function of time. Cheers Edgar -- Edgar J. Kaiser http://www.emphys.com
Sheng Yao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月14日 GMT-4 01:51
Thanks a lot !
Thanks a lot !
Montassar Aidi Sharif
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月22日 GMT-4 14:44
Hello
How can design a vibrating sphere into water
thanks,
MASH
Hello How can design a vibrating sphere into water thanks, MASH

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content