Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Radiative thermal transfer
Posted 2013年4月16日 GMT-4 05:57 Heat Transfer & Phase Change Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I am solving a thermal stress problem and I actually have some questions regarding the radiative heat transfer model.
So I am modelising the behaviour of a brick (the one used in masonry constrction) at high temperature.
The brick has many cavities that are filled with air.
Here is a picture of a typical brick I modelise:
www.villas-mediterranee.com/files/news/BRIQUE.jpg
It’s very important for me to take into account radiative heat transfert.
So I am not sure how to do that :
- Does the module « Heat Transfer in Fluids » take in account that kind of heat transfert.
- Or do I need to use the option « Surface-to-Ambiant Radiation », in which case I don’t know what value to set in Tamb (since actually that temperature is not fixed and varies).
Thanks in advance,
Ahmed
Hello Sridi Ahmed
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.