Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
moving object by magnetic field
Posted 2013年4月17日 GMT-4 16:43 Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I'm new to COMSOL. I was trying to simulate the motion of a magnetic object due to external magnetic field.
The magnetic field is generated by a single wire, and I can get the magnetic force exerted on the object. But I don't know how to simulation its motion. Shall I use the time dependent study and ALE?
Thank you in advance!
I'm new to COMSOL. I was trying to simulate the motion of a magnetic object due to external magnetic field.
The magnetic field is generated by a single wire, and I can get the magnetic force exerted on the object. But I don't know how to simulation its motion. Shall I use the time dependent study and ALE?
Thank you in advance!
Attachments:
1 Reply Last Post 2013年4月18日 GMT-4 01:13
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the electromagnetic physics does not include the "solid" physics so you need to add that, and as you say, if a geometry is moving you need the ALE to get the "air" mesh to follow the motion.
Be sure you put ALE first in the node list, at least BEFORE / Higher up than "Solid"
--
Good luck
Ivar
the electromagnetic physics does not include the "solid" physics so you need to add that, and as you say, if a geometry is moving you need the ALE to get the "air" mesh to follow the motion.
Be sure you put ALE first in the node list, at least BEFORE / Higher up than "Solid"
--
Good luck
Ivar