Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Eigenfrequency study with FSI interface in 4.3a
Posted 2013年4月18日 GMT-4 12:54 Studies & Solvers Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
I attempted to use the FSI interface with the eigenfrequency study step using its default configuration under 'custom studies' in the model wizard. The study step indicates a warning, however, so I suspect the eigenfrequency solver settings are not compatible with the physics settings. I included a simple model to illustrate the fault. All eigenfrequency solutions appears at 'NaN.'
Has anyone had any luck with this interface using an eigenfrequency study?
Has anyone had any luck with this interface using an eigenfrequency study?
Attachments:
1 Reply Last Post 2013年4月18日 GMT-4 13:51
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
no way, it's not set up for those equations. Eigenfrequency and fluics is tricky and does not work as easly as for solid alone.
--
Good luck
Ivar
no way, it's not set up for those equations. Eigenfrequency and fluics is tricky and does not work as easly as for solid alone.
--
Good luck
Ivar