Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to assign automated input values?
Posted 2013年5月2日 GMT-4 01:37 Heat Transfer & Phase Change, Mesh, Studies & Solvers Version 3.5a, Version 4.0 1 Reply
Please login with a confirmed email address before reporting spam
Can we assign input values to faces of an object via .csv file or through any web based tools?
1 Reply Last Post 2013年5月2日 GMT-4 02:11
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
try loding your csv values into an interpolation function and then refer to that function within COMSOL there are a fwd examples in the model library, and it has been discussed on the Forum, typically for comparing experimental results or usig measured results in a simulation
--
Good luck
Ivar
try loding your csv values into an interpolation function and then refer to that function within COMSOL there are a fwd examples in the model library, and it has been discussed on the Forum, typically for comparing experimental results or usig measured results in a simulation
--
Good luck
Ivar