Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simple model not converging

Posted 2025年7月29日 GMT+8 23:33 Electromagnetics, Studies & Solvers Version 6.2 1 Reply

Kyle MacRobbie
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I am trying to model electric field shielding with a copper box that has some holes in it. I feel as though this should be a very simple simulation for COMSOL to run, but for some reason my convergence plot plateaus before the specified tolerance of the solver. I have tried doing very fine meshing, and this did not help.

Does anyone know what I can do about this?

Thanks

1 Reply Last Post 2025年7月30日 GMT+8 15:21
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025年7月30日 GMT+8 15:21

Kyle,

in the ec physics the solver needs a non-zero conductivity in all domains, also in air. You can start with something as low as 1 S/m or lower as long you get convergence.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Kyle, in the ec physics the solver needs a non-zero conductivity in all domains, also in air. You can start with something as low as 1 S/m or lower as long you get convergence. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content