Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
coupling solid mechanics with magnetic fields
Posted 2013年5月14日 GMT-4 05:49 Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3a 2 Replies
Please login with a confirmed email address before reporting spam
I'm currently trying to analyze the change of magnetic flux that is made by a 3D magnet that is adjusted on a periodically moving beam. (Physics: SOLID, MF and Time Dependent)
But unfortunately my simulation does not converge.
I checked all my BC (Boundary conditions) in order to have a unique solution and made a finer mesh, but it didn't help. I think I'm doing something wrong with the coupling between MF and SOLID Physics.
How can I couple these two physics in order to get the simulation work?
I would be really happy and thankful if someone can take a look at my model and help me out!
Mario
Attachments:
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
I have seen your question/model and the idea of the work you have for your thesis.
I am doing my master thesis as well and I have a problem with magneto structural coupling that probably you could help me in some way!
Would you be available? Or any way to contact you?
Best regards