Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
FSI of Synthetic Jet Actuator
Posted 2013年6月17日 GMT-4 06:10 2 Replies
Please login with a confirmed email address before reporting spam
I am working on simulation of synthetic jet actuator and i am coupling the FSI and Piezoelectric devices physics. i am trying to model case study from one of the paper that was presented in comsol conference 2010 in order to develop my confidence with Comsol because i am new comsol user here is its link
www.comsol.com/papers/9465/
the boundary conditions are 2D Axisymmetric and applied voltage is 100 and also i have a reasonable deflection of diaphragm like 80 microns but the exit velocity is too low the order of 10^-20 etc, i think that their is coupling problem between Piezoelectric and FSI. Please tell me that do i mention some coupling command between these two physics
and also in my case flow is not lamina but in FSI when you want give boundary conditions it show laminar and solid mechanics please tell me this fsi will work for turbulent flow or i have to couple turbulent flow also.
i have attached geometry and some result i need your help
Guys looking for your kind and prompt replies.
Best Regards
Muhammad Ikhlaq
Attachments:
Hello Muhammad Ikhlaq
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I am too working on the similar case. Could you share your file so that I can look at it ?
Please login with a confirmed email address before reporting spam
muhammad.ikhlaq@ozu.edu.tr
Best regards