Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Anisotropic simulation of a boat
Posted 2013年6月20日 GMT-4 15:41 Geometry, Structural Mechanics Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
In our project we're simulating the warpage of a bost we're building, using a composite of fiber glass and resin. For the simulation we're having problems mapping the surface because of the anisotropic material properties caused by the different fiber orientations in the different layers.
Does somebody have a tutorial or know how to adapt the coordinate system to this anisotropic 3D problem? Attached is a picture of the shape of the boat and one of the different layers disposition.
Thank you!
Attachments:
Hello Andreas Prager
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.