Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Hydrodynamic drag

Posted 2013年6月24日 GMT-4 16:38 0 Replies

Umer Hassan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

I am trying to simulate the hydrodynamic drag force on a particle of 8um suspended in a fluid which is flowing at a flow rate of 20uL/min through the micro-channel of 15umx15um entrance/exit cross-section. the length of the channel could be say 200 um.

I am interested in simulating the hydrodynamic drag force being inserted on a particle while flowing through that channel.. I have already made the geometry and added laminar flow physics and particle tracing but couldn't get the force.

Please have a look at the attached file and suggest.

Thanks, your suggestions would be helpful...

Attachments:

0 Replies Last Post 2013年6月24日 GMT-4 16:38
COMSOL Moderator

Hello Umer Hassan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content