Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to cut a geometry

Please login with a confirmed email address before reporting spam

Hello,
I have a 3D geometry and I need to cut half of it to create a symmetry plane.
Can you please describe the steps.
Thanks.
Regards,
Dimitris

3 Replies Last Post 2013年8月23日 GMT-4 02:39
Josh Thomas Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年7月12日 GMT-4 08:39
Dimitris,

If you are using v4.3b the steps have been simplified a bit from previous versions.

Simply define a work plane that slices your geometry across the symmetry plane: (Right-click on Geometry and select Work Plane.)

Then, partition. (Right-click on Geometry and select Boolean Operations>Partition)

Add the object to partition to the list. Then select to "Partition with:" Work Plane and select your work plane.

(You can then use a Delete Entities operation to delete half your geometry if desired.)

Best regards,
Josh Thomas
AltaSim Technologies

Dimitris, If you are using v4.3b the steps have been simplified a bit from previous versions. Simply define a work plane that slices your geometry across the symmetry plane: (Right-click on Geometry and select Work Plane.) Then, partition. (Right-click on Geometry and select Boolean Operations>Partition) Add the object to partition to the list. Then select to "Partition with:" Work Plane and select your work plane. (You can then use a Delete Entities operation to delete half your geometry if desired.) Best regards, Josh Thomas AltaSim Technologies

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年8月22日 GMT-4 04:59
how can we cut geometry in version 4.2
how can we cut geometry in version 4.2

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年8月23日 GMT-4 02:39
Add a block and subtract it from your geometry. Then use symmetry boundary condition on the intersection.
Add a block and subtract it from your geometry. Then use symmetry boundary condition on the intersection.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.