Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Silicon onchip Microchannel Water Heat sink
Posted 2013年7月13日 GMT-4 14:46 0 Replies
Please login with a confirmed email address before reporting spam
I am presently working on a project that involves the simulation of a micro-channel heat sink on COMSOL, i have gone through various literatures and have also followed the microchannel turorial COMSOL provided. i am however having problems with my model, in that it records a rather too high temperature (above 1000k) with applicatin of power as little as 50W. and i am yet to figure out where the problem is emanating from. the size of the silicon chip is 1cmx1cm, with approximately 90 signle rectangular microchannel at the back, a channel height 300microns, and width 50microns, the side walls are 50 microns as well. I made use of a heat source to serve as the heating element of the chip, the materials are silicon and water. with this dimensions i am suppose to get an approximate cooling density of around 790W/cm-sqr. Is their anyone in the house that could please help in looking into my design.
thanks.
Hello Abdullahi Alfa
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.