Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Meshing 2-D and 3-D geometries with matching meshes
Posted 2013年7月29日 GMT-4 15:59 Geometry, Mesh, Studies & Solvers Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I have a very expensive 3-D electro-chemistry problem which I am trying to simplify. The problem has fluid flow and electro-chemistry (tertiary current distribution) equations in it. I would like to solve the full 3-D model for just the flow equation. Then take a slice as shown in the figure and then use the resulting 2-D model to solve my tertiary current distribution equations in that 2-D slice using the fluid-flow data in the 2-D slice as the input.
I am using a swept mesh for my 3-D model. Is there someway to connect my 2-D and 3-D models so that my 3-D swept mesh matches my 2-D mesh?
Thanks!
Sri.
Attachments:
Hello Sri Puranam
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.