Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modelling Pyroelectricity of PVDF

Posted 2013年8月22日 GMT-4 12:15 Version 4.3 1 Reply

Jason Bevis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I was wondering if anyone had undertaken a model to determine the pyroelectric output voltage of a PVDF film (or any other pyroelectrically active piezoelectric material) when exposed to a given heat input on one side of the film over time. The film can be considered as a 100mm dia circular disc with a circular active electrode of approximately 4mm dia. I was intending on making a 2D axisymmetric model at first.

I am fairly new to COMSOL and thought that I would see if a simple /obvious path to implement pyroelectricity has already been undertaken elsewhere before I struggle onward! This will form part of a larger model with acoustic heating, but I have already undertaken that and only need assistance with the pyroelectric aspect.

Many Thanks in advance
Jason
1 Reply Last Post 2014年11月25日 GMT-5 01:49
COMSOL Moderator

Hello Jason Bevis

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Harikrishnan C
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014年11月25日 GMT-5 01:49
dear Jason Bevis,

I am doing modelling related with piezo polymer-ceramic composite , but i am unable to give the coupling and elastisity matrix for , polymer and composite can you kindly help me

thanks in advance
harikrishnan c
dear Jason Bevis, I am doing modelling related with piezo polymer-ceramic composite , but i am unable to give the coupling and elastisity matrix for , polymer and composite can you kindly help me thanks in advance harikrishnan c

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content