Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

About implementing a crystal plasticity model in COMSOL

Please login with a confirmed email address before reporting spam

Hello,

I am a new user of COMSOL and would like to implement a gradient model of crystal plasticity in COMSOL. At this point, I don't have the access to the Nonlinear Structural Materials Module, and I chose to implement for small strain. Please advise me on this and suggest me some example or reference that I can follow.

Regards

Fazle

2 Replies Last Post 2015年9月3日 GMT-4 10:04
COMSOL Moderator

Hello Fazle Ahad

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月12日 GMT-4 14:12
Hi Fazle,

I am also trying to model Crystal Plasticity in COMSOL. Have you been able to do so?
I hope you still reach to this message.

Thanks,
Mehdi
Hi Fazle, I am also trying to model Crystal Plasticity in COMSOL. Have you been able to do so? I hope you still reach to this message. Thanks, Mehdi

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年9月3日 GMT-4 10:04
Hi,
Are you trying to implement CP in fully coupled approach or uncoupled approach? Are you using your own CP code or do you have a code from someone else?

Regrads
Ayman
Hi, Are you trying to implement CP in fully coupled approach or uncoupled approach? Are you using your own CP code or do you have a code from someone else? Regrads Ayman

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.