Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electric field lines, Current density lines

Posted 2013年9月9日 GMT-4 06:54 RF & Microwave Engineering Version 4.2a, Version 4.3a 2 Replies

Nikola Bralovic
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear All,

I have trivial issue.

I have model which consists of metal nanoparticles on substrate (RF module).
After simulation, I want to plot electric field lines (Ex and Ey component) and current density lines (Jx and Jy component) for some particular wavelength.

Where is the function for that kind of plotting?

Thanks in advanced.

2 Replies Last Post 2013年9月16日 GMT-4 11:47
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年9月10日 GMT-4 12:37
Field lines can be plotted as "streamlines." For example, in the Model-Builder, right-click "Results" and choose either 2D plot group or 3D plot group. Then right-click on that plot group and choose Streamline. The select or enter the variable values appropriately. You should also find "arrow volume" and "arrow surface" plots to be helpful in visualizing fields.
Field lines can be plotted as "streamlines." For example, in the Model-Builder, right-click "Results" and choose either 2D plot group or 3D plot group. Then right-click on that plot group and choose Streamline. The select or enter the variable values appropriately. You should also find "arrow volume" and "arrow surface" plots to be helpful in visualizing fields.
Nikola Bralovic
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年9月16日 GMT-4 11:47

Field lines can be plotted as "streamlines." For example, in the Model-Builder, right-click "Results" and choose either 2D plot group or 3D plot group. Then right-click on that plot group and choose Streamline. The select or enter the variable values appropriately. You should also find "arrow volume" and "arrow surface" plots to be helpful in visualizing fields.


Thanks on answer.

I also found one good option. Right click on Electric field (in Model Builder list) and go to the Arrow surface. Then it is possible to plot lines.

Thanks again.

Regards,

Nikola

[QUOTE] Field lines can be plotted as "streamlines." For example, in the Model-Builder, right-click "Results" and choose either 2D plot group or 3D plot group. Then right-click on that plot group and choose Streamline. The select or enter the variable values appropriately. You should also find "arrow volume" and "arrow surface" plots to be helpful in visualizing fields. [/QUOTE] Thanks on answer. I also found one good option. Right click on Electric field (in Model Builder list) and go to the Arrow surface. Then it is possible to plot lines. Thanks again. Regards, Nikola

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content