Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Glass break as result of pressure - fire sprinkler tube
Posted 2013年12月2日 GMT-5 09:55 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
I am trying to simulate a fire sprinkler tube of glass with glycerol inside it. As result of increased temperature the glycerol should expand and the glass will break. In the tube there is also a little air so the glycerol has some space to expand. But the question now is, how can I simulate this in such a way the glass will break?
I have made a model with a heated air-flow and the glycerol is expanding with a high pressure as result but the glass is not breaking.
Regards,
Chris
Attachments:
Hello Chris
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Where you able to get your model working?
Best,
James