Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulation of Van der Waals forces using Comsol v4.3

Please login with a confirmed email address before reporting spam

I'm trying to simulate the attractive Van der Waals force between two nanometric structures. My initial idea was to integrate the Lennard-Jones potential created by one domain (\integral (rho/M)*(1/|r1-r2|^8-1/|r1-r2|^14)*(r1-r2)*dxdydz, however I'm not able to integrate functions that have more variables (i.e. the result of integrating this over R1 would be a function of R2). What suggestions would you have to approach this problem?

Any help would be appreciated!

Marc

4 Replies Last Post 2017年6月11日 GMT-4 13:46
Sven Friedel COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年12月4日 GMT-5 10:56
Hi Marc,

you would probably like to use the dest() operator. Please check out the help for it.
If it does not work out send your file here or to us in support@comsol.com

Sven
Hi Marc, you would probably like to use the dest() operator. Please check out the help for it. If it does not work out send your file here or to us in support@comsol.com Sven

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年12月9日 GMT-5 16:58
That's exactly what I was looking for. Thank you!
That's exactly what I was looking for. Thank you!

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年9月12日 GMT-4 15:51
Marc - I'm interested in your VdW model; did you succeed in implementing it in 4.3?

thanks,

Manyalibo
Marc - I'm interested in your VdW model; did you succeed in implementing it in 4.3? thanks, Manyalibo

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年6月11日 GMT-4 13:46
I am as well. I am trying to model Van Der Waals forces for a RF MEMS Switch. Any nudge in the right direction would help.
I am as well. I am trying to model Van Der Waals forces for a RF MEMS Switch. Any nudge in the right direction would help.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.