Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulation of a heated mixer
Posted 2013年12月29日 GMT-5 09:55 Fluid & Heat, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
In a school project, we are trying to simulate liquid mixed and heaten. We have simulated the heating, which works. However, when we're trying to simulate the mixing, it always fails.
To do it we first followed the "Laminar Flow in a Baffled Stirred Mixer" tutorial, which perfectly works. We tried to applied it on our geometry, without any success. We modified many parameters but the simulation always stops before the end (we don't simulate heating in the same time).
Would it be possible to modify the geometry of the "Laminar Flow in a Baffled Stirred Mixer" ?
Or is it any easier way to simulate the machinery ?
(or does somebody has always done such a simulation and has got the file :) ? )
Thanks a lot for your answers
Hello Battiatus
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.