Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Coupling Poisson and Transport
Posted 2013年12月30日 GMT-5 11:49 Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am using Comsol 4.3a and want to couple Poisson and transport for determining the flow of charge (or electrical current) within an wire due to application of voltage across it. Now, the output variable for Poisson is "u", while the input variable for "Transport using diluted species" is "V".
How can I couple these two modules (i.e., Poisson and Transport using diluted species) by feeding output of Poisson "u" into the input of transport as "V", because "u" is used in the transport equation for defining a different quantity "velocity field". Can I redefine the variables for either Poisson or Transport module?
- Ahmad
I am using Comsol 4.3a and want to couple Poisson and transport for determining the flow of charge (or electrical current) within an wire due to application of voltage across it. Now, the output variable for Poisson is "u", while the input variable for "Transport using diluted species" is "V".
How can I couple these two modules (i.e., Poisson and Transport using diluted species) by feeding output of Poisson "u" into the input of transport as "V", because "u" is used in the transport equation for defining a different quantity "velocity field". Can I redefine the variables for either Poisson or Transport module?
- Ahmad
1 Reply Last Post 2014年1月3日 GMT-5 02:26
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Have you tried to add the name of the Poisson-Boltzmann node into "u" : nodename.u?