Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

CAD import problems

Posted 2010年3月24日 GMT-4 07:50 6 Replies

alirod
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

I'm trying to import three COMSOL CAD objects. I have no problem to import each object in COMSOL CAD and work with it.

However, it is impossible to import two or more objects in the same simulation. When I try to work with them I get:
Error: 2023
Unable to resolve the relationships subdomain

What I can do?
Thank you very much for all your suggestions.
Alicia

6 Replies Last Post 2010年4月6日 GMT-4 12:31
R. F. Hamou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年3月25日 GMT-4 07:45
Hi,

Could you explain more your problem?? I could not understand " it is impossible to import two or more objects in the same simulation" ?
Hi, Could you explain more your problem?? I could not understand " it is impossible to import two or more objects in the same simulation" ?
alirod
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年3月25日 GMT-4 08:14
Hi,
I will try to explain it better ...
My simulation is an example of electromagnetism, where I have several objects: a coil, a core .... etc. Each of these objects are saved in different CAD files.
I import one by one these Comsol files and I can draw on the same plane XYZ, but when I try to work with this system I get the error:
Error: 2023
Unable to resolve relationships subdomain
However, if I only work with one of these objects (the coil, for example) I can make the entire simulation...and I don't know why.

I hope it is clear now!
Thanks,
Alicia
Hi, I will try to explain it better ... My simulation is an example of electromagnetism, where I have several objects: a coil, a core .... etc. Each of these objects are saved in different CAD files. I import one by one these Comsol files and I can draw on the same plane XYZ, but when I try to work with this system I get the error: Error: 2023 Unable to resolve relationships subdomain However, if I only work with one of these objects (the coil, for example) I can make the entire simulation...and I don't know why. I hope it is clear now! Thanks, Alicia
R. F. Hamou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年3月25日 GMT-4 08:20
Try to import all your objects. After that export the whole geometry as a separate .mphbin file.
Load again this file and try to make your simulation.

Another question: which CAD file are you using??
Try to import all your objects. After that export the whole geometry as a separate .mphbin file. Load again this file and try to make your simulation. Another question: which CAD file are you using??
alirod
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年3月31日 GMT-4 03:20
Thank you very much for you advice. I tried to do what you said but I got the same error.
My CAD files are .stl.
I solved my problem using two pairs in the geometry .....I do not know why, but it was solved!!
Regards,
Alicia
Thank you very much for you advice. I tried to do what you said but I got the same error. My CAD files are .stl. I solved my problem using two pairs in the geometry .....I do not know why, but it was solved!! Regards, Alicia
Oliver Kripfgans
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年4月5日 GMT-4 17:00
Hi Alicia,

I have the same problem. Could you give a quick hint as to what:
"using two pairs in the geometry"
means?

Thanks in advance!
-OK
Hi Alicia, I have the same problem. Could you give a quick hint as to what: "using two pairs in the geometry" means? Thanks in advance! -OK
alirod
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年4月6日 GMT-4 12:31
Hi Oliver,
The easiest solution for my problem was: first, I imported the geometry and then, I selected the option "Use Assembly" in the "Draw" menu.
I hope it is useful for you.
Good luck,
Alicia
Hi Oliver, The easiest solution for my problem was: first, I imported the geometry and then, I selected the option "Use Assembly" in the "Draw" menu. I hope it is useful for you. Good luck, Alicia

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content