Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to get initial stress in "pzd" from "solid mechanics" stress?

Posted 2014年1月23日 GMT-5 23:13 Structural Mechanics Version 4.3b 1 Reply

Nadom Mutlib
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to simulate the propagation of ultrasonic wave in small strip after it has been stressed by a static load. so, I selected two two branches of Structural Mechanics physics: "solid mechanics" and "piezoelectric" and selected one study with two steps: "stationary" and "time dependent" respectively. my question is: how to include the stress of the first physics (of the static load) into the second physics (of the wave) which is represented by "pzd"? knowing that I used the "initial stress and strain" under " linear elastic material" for the second physics "pzd" but it was not useful. any note will be helpful.
Best Regards
1 Reply Last Post 2017年3月3日 GMT-5 01:20
COMSOL Moderator

Hello Nadom Mutlib

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

安泰 杨
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年3月3日 GMT-5 01:20

I am trying to simulate the propagation of ultrasonic wave in small strip after it has been stressed by a static load. so, I selected two two branches of Structural Mechanics physics: "solid mechanics" and "piezoelectric" and selected one study with two steps: "stationary" and "time dependent" respectively. my question is: how to include the stress of the first physics (of the static load) into the second physics (of the wave) which is represented by "pzd"? knowing that I used the "initial stress and strain" under " linear elastic material" for the second physics "pzd" but it was not useful. any note will be helpful.
Best Regards

hi, have you solved this problem? i am doing the same silulation like you did. could you please share you ideas with me? Thanks a lot.

[QUOTE] I am trying to simulate the propagation of ultrasonic wave in small strip after it has been stressed by a static load. so, I selected two two branches of Structural Mechanics physics: "solid mechanics" and "piezoelectric" and selected one study with two steps: "stationary" and "time dependent" respectively. my question is: how to include the stress of the first physics (of the static load) into the second physics (of the wave) which is represented by "pzd"? knowing that I used the "initial stress and strain" under " linear elastic material" for the second physics "pzd" but it was not useful. any note will be helpful. Best Regards [/QUOTE] hi, have you solved this problem? i am doing the same silulation like you did. could you please share you ideas with me? Thanks a lot.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content