Discussion Forum

Forum Home

New Discussion

Note: This discussion is about an older version of the COMSOL Multiphysics^® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calculating Volume Surrounded by known Surface

Posted 2014年2月24日 GMT-5 23:37 Structural Mechanics Version 4.3b 2 Replies

Chin Neng Leong

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

How am I going to calculate volume with known surface?

For example, I have a hollow hemisphere with specific wall thickness. After I applied pressure at the inner surface, the hemisphere will expand. How should I calculate the volume of the space surrounded by the swelled hemisphere?

Thanks

2 Replies Last Post 2014年2月25日 GMT-5 03:14

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi Leong

Do you follow regularly the COMSOL Blogs ?
www.comsol.com/blogs/

Take a look at this:
www.comsol.com/blogs/computing-controlling-volume-cavity/

I have also seen pass a few threads on the FORUM

--
Good luck
Ivar

Chin Neng Leong

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi Ivar,

I don't know about this blog before, thanks for letting me know about it. The link you sent me is really helpful. Thanks you very much.

CN

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Discussion Forum

Calculating Volume Surrounded by known Surface

Suggested Content