Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

simulating bubble generation in water using T-junction

Posted 2014年4月7日 GMT-4 15:35 Fluid & Heat, Microfluidics Version 4.4 0 Replies

Hamed Gholami Derami
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi ,
I'm trying to simulate air bubble generation in water flow using T-junction . I sketched a 3D model in microfluidic module using level set laminar two phase flow . the problem is I have used different solvers in COMSOL but each time I receive error in comutation ( zero matrix , time adaptation interrupt ..) , can anyone help me finding a suitable solver for my problem.

thanks.
0 Replies Last Post 2014年4月7日 GMT-4 15:35
COMSOL Moderator

Hello Hamed Gholami Derami

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content