Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to obtain the fundamental mode of fiber by using 2D axisymmetry axis

Posted 2014年5月22日 GMT-4 04:27 RF & Microwave Engineering 2 Replies

Guoyong Sun
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Everyone, I try to use the Optic Wave module to simulate the fundamental mode of fiber in the 2D axisymmetry axis, but the results show the higher-order modes. Maybe in 2D axisymmetry axis, the electric field distribution also should be 2D axisymmetry? Because the fundamental mode is not 2D axisymmetry.
2 Replies Last Post 2014年5月22日 GMT-4 21:39
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年5月22日 GMT-4 05:08

That's correct. If you use a symmetry, the whole physics, all the fields, has to respect this symmetry, not just the geometry.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
That's correct. If you use a symmetry, the whole physics, all the fields, has to respect this symmetry, not just the geometry. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Guoyong Sun
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年5月22日 GMT-4 21:39
Thanks for your reply. This is different from the Rsoft and maybe wait for improvement.
Thanks for your reply. This is different from the Rsoft and maybe wait for improvement.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content