Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Error in stationary study
Posted 2014年6月9日 GMT-4 03:14 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to analysis capacitive microphone using perforated diaphragm by COMSOL 4.3. Using Electromechanics physics.But while doing stationary study, the following error shows up**,which I understand is usually due to poorly formed boundary conditions.
How can I form boundary condition to have comsol complete this simulation.??
============
The error is**
Failed to find solution.
segregated group1.
singular matrix
There are 21399 void equation(empty rows in matrix) for variable mod1.u at coordinates:(0.0002665,0.0005,1e-006),(0.00026524,0.0005,1e-0006),(0.00026519,0.0005,0),......
and similarly for degree of freedom(empty columns in matrix)
Return solution is not converged.
=============
Thank you......
Hello Krishnapriya N J
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.