Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Data export in transient simulations

Posted 2014年7月2日 GMT-4 03:23 Heat Transfer & Phase Change, Results & Visualization, Structural Mechanics Version 4.4 0 Replies

mb
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am doing a 3D transient temperature-dependent solid mechanics simulation. The simulation time is around 500 s and I save the values every second.

At the end, I define points on my domain where I want to export the transient data (Results->Data Sets -> Cut Point 3D). Then, Comsol needs a very long time (up to an hour or even longer) to grab the data and to write it to a txt file. Is there a faster way to export transient data pointwise?

I know the probe plots, but they need to be defined in advance and I want to export the data at "interesting points" after having visually evaluated the simulation results.

Thanks, Marcel
0 Replies Last Post 2014年7月2日 GMT-4 03:23
COMSOL Moderator

Hello mb

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content