Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Convergency problem to EMAT model

Posted 2014年7月2日 GMT-4 09:44 Low-Frequency Electromagnetics, Structural Mechanics Version 4.4 0 Replies

Liang Cheng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I build a 3D model to simulate EMAT on non-ferrite sample using 'Magnetic Field, no current' to simulate magnetic field generated from magnet, 'Magnetic Field' to simulate eddy current generated from coil and 'Solid Mechanics' to simulate ultrasonics. In addition, 'time dependant' solve is used.

However, there is always an error saying result is not converged. This error occurred for different level of mesh until the number of mesh make the computer out of memory. My computer has 12 core i7 CPU and 48 GB memory.

Can any one help me to solve this problem?

the model is uploaded.

Thanks,

Liang

Attachments:

0 Replies Last Post 2014年7月2日 GMT-4 09:44
COMSOL Moderator

Hello Liang Cheng

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content