Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Failed to compute elastoplastic strain variables

Posted 2014年7月11日 GMT-4 05:21 Structural Mechanics Version 4.3a 1 Reply

Rishi Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am doing elasto-plastic analysis with initial strains. It is a parametric study with variables in geometry of the model. While solving the problem, for some cases in parametric study it is through. However, for some cases there is error as mentioned in subject.

I have tried it with modifying mesh but no results.

I would be grateful if someone could take a look and point out the mistake in my method.

Thanks in advance

--
Rishi
1 Reply Last Post 2014年7月11日 GMT-4 07:28
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年7月11日 GMT-4 07:28
Hi,

If you search the forum for "Failed to compute elastoplastic" you will find at least half a dozen threads on this subject.

Knowledgebase entry 1150 also discusses this error message.

www.comsol.com/support/knowledgebase/1150/

Regards,
Henrik
Hi, If you search the forum for "Failed to compute elastoplastic" you will find at least half a dozen threads on this subject. Knowledgebase entry 1150 also discusses this error message. www.comsol.com/support/knowledgebase/1150/ Regards, Henrik

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content