Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Elastic strain energy

Posted 2014年8月18日 GMT-4 08:14 Results & Visualization, Structural Mechanics Version 4.3b 8 Replies

Alexander Côté
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is there a way to output the elastic strain energy (and not its density at certain points), as a number for my whole structure? i.e. the half of the volume integral of (stress x strain)?

Thank you
8 Replies Last Post 2014年9月10日 GMT-4 12:02
Frank van Gool COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月18日 GMT-4 08:47
Hi Alexander,

Do you mean the total elastic strain energy? This is called "solid.Ws_tot" in COMSOL and can be accessed under global evaluation for instance.
Note that you can also just create integrals manually under component>>definitions>>component couplings.

Best regards,
Frank
Hi Alexander, Do you mean the total elastic strain energy? This is called "solid.Ws_tot" in COMSOL and can be accessed under global evaluation for instance. Note that you can also just create integrals manually under component>>definitions>>component couplings. Best regards, Frank
Alexander Côté
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月18日 GMT-4 12:54
Hello Frank,

I suspect that's exactly what I want, but I can't find how to access solid.Ws_tot. Accessing just solid.Ws is no problem, but I cannot find where to input the "tot" part, it doesn't recognise it. I have version 4.2a, was it introduced later maybe?

Thanks very much for your help,
Alex
Hello Frank, I suspect that's exactly what I want, but I can't find how to access solid.Ws_tot. Accessing just solid.Ws is no problem, but I cannot find where to input the "tot" part, it doesn't recognise it. I have version 4.2a, was it introduced later maybe? Thanks very much for your help, Alex
Frank van Gool COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月19日 GMT-4 05:21
Dear Alexander,

that explains it. In 4.2a that was not yet introduced.
You can however take the volume integral over the whole domain, of solid.Ws and this gives you the same result as solid.Ws_tot.

best regards,
Frank
Dear Alexander, that explains it. In 4.2a that was not yet introduced. You can however take the volume integral over the whole domain, of solid.Ws and this gives you the same result as solid.Ws_tot. best regards, Frank
Alexander Côté
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月19日 GMT-4 06:21
Hi Frank,

Great, that clears it up, I have to upgrade... just to make sure, can I take the volume integral by starting an integration definition (intop1) in the model, and then doing intop1(solid.Ws)? Just asking because this gives a strange tiny number, far from what I expected...

Thanks again,
Alex
Hi Frank, Great, that clears it up, I have to upgrade... just to make sure, can I take the volume integral by starting an integration definition (intop1) in the model, and then doing intop1(solid.Ws)? Just asking because this gives a strange tiny number, far from what I expected... Thanks again, Alex
Frank van Gool COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月19日 GMT-4 06:42
Hi Alex,

Make sure that all the domains are included in the intop1.
Also, perhaps you can share the result that you have now, and the result what you expect (and why). Perhaps we can find out where this is coming from.

best regards,
Frank


Hi Alex, Make sure that all the domains are included in the intop1. Also, perhaps you can share the result that you have now, and the result what you expect (and why). Perhaps we can find out where this is coming from. best regards, Frank
Alexander Côté
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月19日 GMT-4 08:11
Ok I found the problem, it was a stray input value I forgot to change. It seems to work now. Thank you very much for your help!
Ok I found the problem, it was a stray input value I forgot to change. It seems to work now. Thank you very much for your help!
Balazs Fekete
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年9月10日 GMT-4 08:58
Dear Frank,

I have a question concerning to the strain density. I have an elastoplastic analysis and I want to investigate the the total (included plastic) strain energy at a certain point of the structure. I found only the elastic strain energy density option, however, I carried out my calculation with plastic material model.

Please, could you inform me how can i manage the plastic (or total) strain energy?
Thank you in advance!
BR
Balazs
Dear Frank, I have a question concerning to the strain density. I have an elastoplastic analysis and I want to investigate the the total (included plastic) strain energy at a certain point of the structure. I found only the elastic strain energy density option, however, I carried out my calculation with plastic material model. Please, could you inform me how can i manage the plastic (or total) strain energy? Thank you in advance! BR Balazs
Josh Thomas Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年9月10日 GMT-4 12:02
Hi-

This functionality is available in version 4.4. To calculate plastic dissipation, you will first need to enable "Advanced Physics Options" from the "show" icon in the "model builder". Then, navigate to the branch "Linear elastic Material" in "solid Mechanics" physics interface and enable the "calculate dissipated energy" option in the settings window.

To evaluate the plastic dissipation, for example, you can right click on "Derived values" and choose "Global Evaluation" and then select "Total Plastic dissipation" from the "replace expression" menu.

--
Best regards,
Josh Thomas
AltaSim Technologies
Hi- This functionality is available in version 4.4. To calculate plastic dissipation, you will first need to enable "Advanced Physics Options" from the "show" icon in the "model builder". Then, navigate to the branch "Linear elastic Material" in "solid Mechanics" physics interface and enable the "calculate dissipated energy" option in the settings window. To evaluate the plastic dissipation, for example, you can right click on "Derived values" and choose "Global Evaluation" and then select "Total Plastic dissipation" from the "replace expression" menu. -- Best regards, Josh Thomas AltaSim Technologies

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content