Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
simulation the coupling between SPP model and FP cavity modle
Posted 2014年10月2日 GMT-4 07:35 RF & Microwave Engineering, Modeling Tools & Definitions, Parameters, Variables, & Functions 1 Reply
Please login with a confirmed email address before reporting spam
Hi! I am simulating a model: FP cavity with dielectric inside, is surrounded by botom Ag layer(250nm in thickness) and top Ag film with grating. The light is illuminated normal to grating. I need to simuation the coupling between SPP model and Cavity model to get the reflectivity and aborption.
I plan to place only a port near top Ag grating as incoming port and to get the reflectivity.
questions: 1. Should I get background field first, then solver the total physical field?
2. whether PML is needed?
3. I plan to use Floquet periodicity. Should I set the side of PML with Floquet periodicity?
And are there some models useful to me?
Wait for u suggestions.
Best!
Frank.
I plan to place only a port near top Ag grating as incoming port and to get the reflectivity.
questions: 1. Should I get background field first, then solver the total physical field?
2. whether PML is needed?
3. I plan to use Floquet periodicity. Should I set the side of PML with Floquet periodicity?
And are there some models useful to me?
Wait for u suggestions.
Best!
Frank.
1 Reply Last Post 2014年10月7日 GMT-4 07:39
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Wait for u kind help!