Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Impedance measurement

Posted 2014年10月22日 GMT-4 01:54 Low-Frequency Electromagnetics Version 4.3b 0 Replies

Joydeep Chowdhury
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

We are trying to simulates impedance vs frequency plot for a motochondria elliptic model placed in water buffer medium connected with 10 V supply. We are not getting the desired result. It may be a very subtle problem which we may not track out as we are new in COMSOL.
1. Buffer : Permittivity : 80
Conductivity : 5.5 e-06 S/ m

2. Aluminium Electrode: Permittivity: 1.6
Conductivity : 3.538 e 07 S/ m

3. Mitochondria (the ellipsoid) : Permittivity : 60
Conductivity : 0.3 S/ m

I am interested to estimate Z vs f plot in the frequency range e02 to e08 Hz .
0 Replies Last Post 2014年10月22日 GMT-4 01:54
COMSOL Moderator

Hello Joydeep Chowdhury

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content