Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to start boiling with heat transfer?

Posted 2014年10月22日 GMT-4 09:43 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) 0 Replies

Mudassir Fareed
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I am working on Heat Transfer Module in COMSOL Multiphysics 4.3. In my problem a pipe is submerged in a pool of water and inside the pipe, there is a heat source. Heat is transferred from the pipe to water initially at 70 degree Celsius. After saturation temperature there should be boiling in water. For this case I've used Laminar Two Phase Level set module and conjugate heat transfer module and ran the transient. But i am not getting the results. Can anybody just tell me how to solve? As in this two phase module there is transient with initialization. But i've not initialized the boiling because initially water is below saturation temperature. Kindly guide me. Thanks
0 Replies Last Post 2014年10月22日 GMT-4 09:43
COMSOL Moderator

Hello Mudassir Fareed

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content