Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Unfocused ultrasound therapy heating
Posted 2014年10月23日 GMT-4 17:42 Version 5.1 3 Replies
Please login with a confirmed email address before reporting spam
Hi guys, how can in set unfocused source term in a ultrasound heating tissue.
Thanks for attention
Thanks for attention
3 Replies Last Post 2017年4月12日 GMT-4 01:37
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Nelson,
Thank you for contacting COMSOL Discussion Forum. Let me know if you already have a model like this.
You can follow the "Focused Ultrasound Induced Heating in Tissue Phantom" model in Model Libraries, or take in link below:
-------------------------------------------
cds.comsol.com/mg/8544e2c22340e2.zip
Estimated size: 19.0 MB
This link expires November 3, 2014. Please make sure to download before that date.
Included files:
- models.aco.ultrasound_induced_heating.pdf
- ultrasound_induced_heating.mph
-------------------------------------------
Well, you'll need to modify the Geometry of your device to fit in your case.
Thank you for contacting COMSOL Discussion Forum. Let me know if you already have a model like this.
You can follow the "Focused Ultrasound Induced Heating in Tissue Phantom" model in Model Libraries, or take in link below:
-------------------------------------------
cds.comsol.com/mg/8544e2c22340e2.zip
Estimated size: 19.0 MB
This link expires November 3, 2014. Please make sure to download before that date.
Included files:
- models.aco.ultrasound_induced_heating.pdf
- ultrasound_induced_heating.mph
-------------------------------------------
Well, you'll need to modify the Geometry of your device to fit in your case.
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
I also am interested in using unfocused ultrasound for tissue heating. Have there been any updates on this thread that I am unaware about? I am trying to model a cylindrical catheter and the surrounding tissue heating in 360 degrees.
Thank you in advance
Thank you in advance
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hi :-)
My name is Ahmad, I also work in this field and have just started my PhD in this topic.
I have started with this model, mentioned above, but I have the following problems and really need help in it as I am stuck in this stage and I am not an expert in COMSOL:
1. The source in this model is focused, how to make it unfocused?
2. How can I change the frequency of the ultrasound source? I think I should play with the design itself
That is all what I need to ask about and I really appreciate it if you can help me out in this
Kindest Regards
Ahmad
My name is Ahmad, I also work in this field and have just started my PhD in this topic.
I have started with this model, mentioned above, but I have the following problems and really need help in it as I am stuck in this stage and I am not an expert in COMSOL:
1. The source in this model is focused, how to make it unfocused?
2. How can I change the frequency of the ultrasound source? I think I should play with the design itself
That is all what I need to ask about and I really appreciate it if you can help me out in this
Kindest Regards
Ahmad