Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error simulating

Please login with a confirmed email address before reporting spam

I get an error simulating my model which starts out with an initial temperature and is lowered to room temperature.

The error reads:

The following feature has encountered a problem:

Failed to find a solution
In segregated group 2:
The relative tolerance (6.4e+002) is greater than the relative tolerance.
Returned solution is not converged.
- Feature: Stationary Solver 1 (sol1/s1)

I would attach the file but I get a file size error (!???). The file is 8000+ KB.

Please help me to get rid of this error. Thank you.

1 Reply Last Post 2014年11月25日 GMT-5 02:20
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014年11月25日 GMT-5 02:20
Hi

first of all to attach a file, start by deleting the solution, the mesh and the history, then its far smaller and we others might rebuild it anyhow.

that error means generally that there is a dependent variable that is not fixed, and is allowed to float around, and your BC are not sufficient to give an unique solution for all dependent variables.
This might also come from initial conditions too far away from the expected result.

--
Good luck
Ivar
Hi first of all to attach a file, start by deleting the solution, the mesh and the history, then its far smaller and we others might rebuild it anyhow. that error means generally that there is a dependent variable that is not fixed, and is allowed to float around, and your BC are not sufficient to give an unique solution for all dependent variables. This might also come from initial conditions too far away from the expected result. -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.