Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Two-axis, compound pendulum.
Posted 2015年1月19日 GMT-5 09:21 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I'm new to COMSOL, but I'm interested in using it for a university project that involves modelling what is basically a compound pendulum, that is attached to a two-axis gimbal so it can swing in both x and y directions, if z is vertical.
I've seen that version 5.0 could probably do this quite easily, but the version I have access to at the moment is 4.2a. I wonder if it's still possible with this version?
The simulation needs to include damping and driving forces.
As I said, I'm really new and I'm not even sure where to begin. Any help would be great.
Thanks in advance.
Hello George Roberts
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.