Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
complex refractive index convention in COMSOL waveoptics module
Posted 2015年1月28日 GMT-5 04:56 Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
Can anybody help me to know what is the correct convention of extinction coefficient of refractive index in COMSOL?. I want to assign polystyrene complex refractive index. I have values at 3.4 um wavelength n=1.59 and k=0.0294 (absorption). which one is correct one to represent in comsol to assign PS absorption? 1.59+i*0.0294 or 1.59-i*0.0294?. Any suggestions on this would be appreciated.
Mahendar
Can anybody help me to know what is the correct convention of extinction coefficient of refractive index in COMSOL?. I want to assign polystyrene complex refractive index. I have values at 3.4 um wavelength n=1.59 and k=0.0294 (absorption). which one is correct one to represent in comsol to assign PS absorption? 1.59+i*0.0294 or 1.59-i*0.0294?. Any suggestions on this would be appreciated.
Mahendar
1 Reply Last Post 2015年1月28日 GMT-5 05:05
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Hi again,
I got some info from COMSOL following link. if k<0, lossy medium and k>0, medium with gain
www.comsol.co.in/support/knowledgebase/1009/
I got some info from COMSOL following link. if k<0, lossy medium and k>0, medium with gain
www.comsol.co.in/support/knowledgebase/1009/