Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frequency sweep - Help

Posted 2010年5月30日 GMT-4 01:03 5 Replies

Milad Dagher
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hey guys,

My goal is to plot the dispersion diagram of a single-wire transmission line, aka sommerfeld wave (or goubau line).

1st try:
I used the 2D perpendicular hybrid wave application mode. I did mode analysis (see attached file if you like). According to the analytical solution and the expected field lines, I found the proper effective mode index (1.00something) at 1 GHz frequency.

My question : How can i sweep this frequency to get the dispersion curve?

My problem: If i use parametric solver instead of eigenmode solver it will not calculate the mode that i want.

I hope I get a response, thanks in advance!
Mil
5 Replies Last Post 2010年8月8日 GMT-4 14:31
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年5月30日 GMT-4 01:59
Hi


indeed in v3.5 I do not see any other way than to loop it via matlab by changing your scalar nu... the nominal frequency. In V4 its easier to set up custom sweeps, but 4.0 is still slightly éimiting, but your case like that should go, have you tried ?

Sorry, in v3.5a what about the solve parametric sweep option, the result will be a series of files should work

Have fun Comsoling
Ivar
Hi indeed in v3.5 I do not see any other way than to loop it via matlab by changing your scalar nu... the nominal frequency. In V4 its easier to set up custom sweeps, but 4.0 is still slightly éimiting, but your case like that should go, have you tried ? Sorry, in v3.5a what about the solve parametric sweep option, the result will be a series of files should work Have fun Comsoling Ivar
Milad Dagher
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年5月30日 GMT-4 02:31
Thank you! worked like a charm.

I was expecting it to do the same as the parametric solver. I understand why its there now.

cheers!
Thank you! worked like a charm. I was expecting it to do the same as the parametric solver. I understand why its there now. cheers!
Milad Dagher
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年5月30日 GMT-4 02:41
A follow up question, this time a bit more involved electromagnetically.

The Sommerfeld wave (the mode of choice) is well known to be a TM mode. However, only the mode solver of the hybrid application mode is able to find this mode, and not the TM application mode.
I already know the propagation constant so its easy to look for it and spotting it.

any help is appreciated,
kind regards,
mil
A follow up question, this time a bit more involved electromagnetically. The Sommerfeld wave (the mode of choice) is well known to be a TM mode. However, only the mode solver of the hybrid application mode is able to find this mode, and not the TM application mode. I already know the propagation constant so its easy to look for it and spotting it. any help is appreciated, kind regards, mil
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年5月30日 GMT-4 11:36
Hi

well I'm not sure what to answer, the hybride mode is the full theory, no ? perhaps required to form correctly the desired TM wave ?

Have fun Comsoling
Ivar
Hi well I'm not sure what to answer, the hybride mode is the full theory, no ? perhaps required to form correctly the desired TM wave ? Have fun Comsoling Ivar
mojtaba sadeghi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年8月8日 GMT-4 14:31
hi my dear
in comsol v4
how can i plot dispersion v.s wave lenght?
in photonic crystal
hi my dear in comsol v4 how can i plot dispersion v.s wave lenght? in photonic crystal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content