Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat convection in an Darcy porous media

Please login with a confirmed email address before reporting spam

hi everyone. I'm using comsol 5.0 with the "darcy law" module and the "heat transfer in a porous media" module. My current aim is to simulate heat convection into a carbonate layer filled with water. This is the first time I use comsol so I'm not very prectised with it. This is my set up:

Geometry: simple 2D square

Darcy: fluid and matrix properties with material data, no flux on the sides and no pressure.

Heat Transfer in a porous media: fluid and matrix properties with material data (I selected the darcy law flow field), a certain initial temperature and a different temperature for each square side.

The study is stationary.

The results show no flow at all into my box, as if the temperature doesn't affect water's density. Why do this occours? I have to link somehow density and temperature? I suppose something lacks in my darcy settings.

Thanks

0 Replies Last Post 2015年2月25日 GMT-5 11:01
COMSOL Moderator

Hello Bastiano Deschmann

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.