Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Can I still see all the equations in 4.0?
Posted 2010年6月16日 GMT-4 11:31 3 Replies
Please login with a confirmed email address before reporting spam
Thanks
3 Replies Last Post 2010年6月17日 GMT-4 14:38
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Options > Preferences > Model Builder > Show Equation View
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Typically, it is not enough to do "Show Equation View". One point is that you have to have selected a domain/boundary/whatever before you look at the equations or nothing will show up.
If you do that and you still see no equations, then you may also have to click on the button above the (empty) table of equations. As you mouse over the button says "Restore Equation View", or something like that.
9 times out of 10 this gets you to see the equations you need....
If you do that and you still see no equations, then you may also have to click on the button above the (empty) table of equations. As you mouse over the button says "Restore Equation View", or something like that.
9 times out of 10 this gets you to see the equations you need....
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
thanks... that's really helpful...