Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to apply moment to a surface?
Posted 2015年3月24日 GMT-4 02:29 Heat Transfer & Phase Change, Parameters, Variables, & Functions, Structural Mechanics Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I am trying to model a brake disc in terms of thermal stress during a braking procedure.
I have the thermal part of the simulation down, but I am having trouble with the Structural Mechanics part.
I want to apply a moment on the swept area of the brake pad. The moment is caused by a resulting friction force during braking. I have tried using the Rigid Connector, but as anticipated I get a high stress concentration around the edges. How do i apply a moment to a surface and avoid the stress concentrations around the swept area edges? I have attached a sample model of my problem and a snapshot of the calculated von Mises stress with my current setup.
Thanks in advance!
/Morten R. Drost
I am trying to model a brake disc in terms of thermal stress during a braking procedure.
I have the thermal part of the simulation down, but I am having trouble with the Structural Mechanics part.
I want to apply a moment on the swept area of the brake pad. The moment is caused by a resulting friction force during braking. I have tried using the Rigid Connector, but as anticipated I get a high stress concentration around the edges. How do i apply a moment to a surface and avoid the stress concentrations around the swept area edges? I have attached a sample model of my problem and a snapshot of the calculated von Mises stress with my current setup.
Thanks in advance!
/Morten R. Drost
1 Reply Last Post 2015年4月21日 GMT-4 12:57
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Can you use a boundary load and use a formula for the applied force which yields the correct moment?