Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
frequency domain analysis
Posted 2015年4月24日 GMT-4 13:48 1 Reply
Please login with a confirmed email address before reporting spam
I have build a piezoelectric cantilever for displacement analysis.In frequency domain analysis i have given frequency range: range(0,1,1000).But getting error
" Failed to find a solution for the initial parameter.
The relative residual (10) is greater than the relative tolerance.
Returned solution is not converged."
please help me to solve this error.
" Failed to find a solution for the initial parameter.
The relative residual (10) is greater than the relative tolerance.
Returned solution is not converged."
please help me to solve this error.
1 Reply Last Post 2015年4月24日 GMT-4 14:17
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
I'm having convergence problems myself (see my thread; no response yet) but one thing I'd recommend here is not to increase frequency in 1 Hz steps but rather do an exponential or other type of progression.
For example:
1000*sinh(5*range(0,0.05,1))/sinh(5)
A hyperbolic function is used here because unlike an exponential that gives you zero.
Otherwise it will be a real grind when you're solving 837, 838, 839....
For example:
1000*sinh(5*range(0,0.05,1))/sinh(5)
A hyperbolic function is used here because unlike an exponential that gives you zero.
Otherwise it will be a real grind when you're solving 837, 838, 839....