Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
need help on how to properly simulate a moving mesh
Posted 2010年7月13日 GMT-4 01:07 Version 5.2 9 Replies
Please login with a confirmed email address before reporting spam
i would like to ask some assistance on how i could do this properly.
i have a model composed of two composite geometries. the fist of the two geometries which is the block represents a fluid (water) and the second the second geometry found inside the block represents a porous media.
what i would to like to simulate here is the swelling of the porous media being submerged in the fluid (water).
every time i run the solve features, i always got an error.
i do not know where and which part i did it improperly.
i am attaching the file for you to see the model.
please, anybody knows how to to properly do this, give me some advise.
thank you so much in advance.
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
Thank you so much for responding my email. i am attaching a new file in 3.5a version.
Please login with a confirmed email address before reporting spam
Can you please tell more about the problem in detail? The solver started running just ok.
Please login with a confirmed email address before reporting spam
thank you so much for extending your help.
i am very glad that the model did run properly this time. i just did a several changes and revisited the in inputs of the data.
my apologies for taking your time.
maybe i just committed some errors in inputing the data.
but sooner should problems arise again, i will keep it posted in the forum.
again thank you so much and may God bless you.
jonathan
Please login with a confirmed email address before reporting spam
I'm dealing with a problem similar to that you had, as I can read. May I ask you how you solved the problem of swelling in a porous media with Comsol?
I'd really appreciate your help.
Many Thanks
Simona
Please login with a confirmed email address before reporting spam
What I did before was combine two different physics. Heat transfer in solids and Structural Mechanics. The analogy of the Fourier's Law of Heat Transfer and Fick's Diffusion was used for the moisture diffusion in the media that I was studying. Then for the hygroscopic swelling part, I used the structural mechanics module. You can add the thermal expansion node in structural mechanics. Attached is the picture of what I did.
Hope that helps.
Jonathan
Attachments:
Please login with a confirmed email address before reporting spam
thanks a lot for your answer!
I'm afraid that my problem is a little bit complicated and I need to implement the model with a moving mesh because I can't use the built-in models for the physics. I found problems in coupling equations written with the mathematics module and the moving mesh to simulate at the same time the swelling behaviour and the physics of my problem.
Can you give me some indications?
Thank you
Simona
Please login with a confirmed email address before reporting spam
I've seen one topic in the forum before about moving mesh. Maybe this can help you.
www.comsol.com/community/forums/general/thread/26292/
Transient 3D Moving Mesh
Try to study the works of Prof. Rebecca Cantrell. She perfectly modelled a moving mesh problem.
Jonathan
Please login with a confirmed email address before reporting spam
I've already seen that conversation on the forum, but I'll try to study in more detail the work of Prof. Cantrell.
Simona