Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

hi

Please login with a confirmed email address before reporting spam


hi

i'm trying to use comsol for wind turbine , how can i make the blade moving in the air tunnel by the wind force
cheers




2 Replies Last Post 2010年8月11日 GMT-4 09:08

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年8月11日 GMT-4 09:07
Hi MOHAMED,


Regarding wind turbine application the generator should have a minimal
reluctance torque and require to be direct-driven to lessen mechanical losses in the application.
For this objective the stator winding is wound around a slotless ring core. The rotor disc has
18 surface installed magnet poles.

--
Jessica Leahy
CollectWealth.ws
Hi MOHAMED, Regarding wind turbine application the generator should have a minimal reluctance torque and require to be direct-driven to lessen mechanical losses in the application. For this objective the stator winding is wound around a slotless ring core. The rotor disc has 18 surface installed magnet poles. -- Jessica Leahy http://CollectWealth.ws

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年8月11日 GMT-4 09:08
Hi MOHAMED,


Regarding wind turbine application the generator should have a minimal
reluctance torque and require to be direct-driven to lessen mechanical losses in the application.
For this objective the stator winding is wound around a slotless ring core. The rotor disc has
18 surface installed magnet poles.

--
Jessica Leahy
CollectWealth.ws
Hi MOHAMED, Regarding wind turbine application the generator should have a minimal reluctance torque and require to be direct-driven to lessen mechanical losses in the application. For this objective the stator winding is wound around a slotless ring core. The rotor disc has 18 surface installed magnet poles. -- Jessica Leahy http://CollectWealth.ws

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.