Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Re: Fluxgate magnetometer

Posted 2015年6月2日 GMT-4 07:00 0 Replies

Ansaribinhyder
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello sir
I am working on fluxgate sensors. The basic fluxgate principle is that the ferromagnetic core is excited by the ac current ( Iexc) of frequency f into the excitation winding. The core permeability mu(t) is therefore changing with 2f frequency. If the measured dc feild B0 is present, the associated core flux is also changing with 2f and voltage (Vind) is induced in the pickup(measuring) coil having N turns.

So according to this my questions
Q1) How to drive the material into saturation?

Q2) How can i measure the induced emf from the secondary coil?

Q3) Final thing to create external magnetic field should i need to use mfnc or mf?

Thanks in advance.
0 Replies Last Post 2015年6月2日 GMT-4 07:00
COMSOL Moderator

Hello Ansaribinhyder

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content